This palm-size Sandwave 510 battery from CCELL pairs a 400 mAh cell with three voltage presets, a magnetic drop-in ring and draw activation with no buttons.
The Sandwave 510 battery is a compact palm format from CCELL. It has a matte, ribbed black shell and measures 60 × 38.2 × 16.2 mm. So it sits flat in the hand and slips into a pocket. Inside is a 400 mAh lithium-ion cell. There are no buttons, because the heater starts the moment you draw.
First, press the magnetic adapter ring onto your cartridge. Then drop it into the slot, and the magnets keep it in place. Standard 510 cartridges fit this way. CCELL names its TH2, M6T and TH205-RYS as the best matches for the slot. Swapping one cartridge for another only means moving the ring.
A side switch picks between the three voltage presets of 2.8 V, 3.2 V and 3.6 V. Slide it to the setting that suits your cartridge. After that, the LED confirms each draw. It also shows the battery status, so you can see when a charge is due.
Before charging, always remove the cartridge from the slot. Then connect the supplied USB-C cable to the port. A full charge takes about 90 minutes. Built-in protection guards the cell against over-charge and short circuit, which keeps the circuit safe on every charge.
Medvape is an official CCELL dealer, and the Sandwave 510 battery is one of several 510 formats in our Dry Herb Vaporizer range. For a slim pen shape, look at the CCELL M4 510 battery. For another palm body, compare the CCELL Palm SE 2.0. General background on the device type is on the Wikipedia page about the vaporizer as well.
Does it have a power button? No. It is draw-activated, so there is nothing to press or hold.
Which voltage presets are there to choose from? You get 2.8 V, 3.2 V and 3.6 V, set with the side switch.
What is in the box? The battery comes with the magnetic adapter ring and a USB-C cable for charging.